viper 5901 on chrysler 300?

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 on chrysler 300? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

shongboy

Member - Posts: 12

Joined: September 16, 2010

Location: Connecticut, United States

Posted: September 18, 2010 at 6:54 PM / IP Logged

i just ordered a new viper 5901 for my 05 chrysler 300. it doesn't have a factory alarm just keyless entry. i also ordered a canmax400 module and the xkloader2 to put the firmware on it. just wondering if there is anything else i'll need to do this install and any tips/tricks while doing it? this will be my first time installing an alarm/remote starter. thanks guys

android67

Member - Posts: 12

Joined: July 08, 2010

Location: United Arab Emirates

Posted: September 19, 2010 at 1:13 PM / IP Logged

No expert here, but I purchased the same for my Jeep Cherokee and I also picked up a Xpress Key for the CANMAX400 that may save you some headaches.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 on chrysler 300?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.