avital 4111 issue

Home / the12volt's Install Bay / Car Security and Convenience / avital 4111 issue (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

sgarcia1212

Member - Posts: 40

Joined: October 08, 2010

Location: California, United States

Posted: June 28, 2011 at 9:31 AM / IP Logged

Howie,

(On the diagram above)

Just to make sure, from switch = from/to defroster?

To A/C = accessory, when ignition is open?

Thanks.

sgarcia1212

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 28, 2011 at 9:35 AM / IP Logged

Cut the tested wire:-

85 from status output or timed aux.

86 from constant 12V+ supply.

87 to good ground.

87a to SWITCH side of wire

30 to other side of cut wire.

sgarcia1212

Member - Posts: 40

Joined: October 08, 2010

Location: California, United States

Posted: June 29, 2011 at 8:17 PM / IP Logged

howie,

I got to work now, but the defroster light didn't turn on during the remote start operation.

the defroster does get warm, that is why I know it works.

i guess is normal for the light to stay off.

thanks all of you for the big help...

sgarcia1212

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avital 4111 issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.