amp not turning on

Home / the12volt's Install Bay / Car Audio / amp not turning on (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

franchise1291

Member - Posts: 1

Joined: August 11, 2011

Location: Massachusetts, United States

Posted: August 11, 2011 at 10:35 AM / IP Logged

Hi I just upgraded my system, I had my car wired with 8 GA. and had a line out converter because of my factory head. Now I upgraded to a pioneer dvd double din and 4 Ga. wire and ground with an upgraded 12w3v3 and jl 500/1. The thing is the amp doesn't get power, I have the ground, power, and the rest of the wire hooked into it. The only one I am weary about is the remote lead. I have it spliced into the 12 volt switch in the trunk of my 1998 buick park ave. but stil nothing that is where it was hooked in before and worked fine. when i was removing the old sub it snagged the remote and pulled it from the wire it was wrapped around. Any suggestions on what I can do?

Franchise

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: August 11, 2011 at 11:05 AM / IP Logged

Do you own a volt meter?

Support the12volt.com

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 11, 2011 at 3:27 PM / IP Logged

If it is a slash series amp, slide the signal sensing switch to the ON position.

co_ne_dub

Copper - Posts: 80

Joined: November 30, 2010

Location: Nebraska, United States

Posted: August 15, 2011 at 8:49 AM / IP Logged

12v switch in the trunk?

How does that switch activate?

Why did you not use the deck remote wire?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp not turning on

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.