the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 dodge ram with viper 5101


Post ReplyPost New Topic
< Prev Topic Next Topic >
stsymbal 
Member - Posts: 2
Member spacespace
Joined: February 18, 2012
Location: New York, United States
Posted: February 18, 2012 at 4:46 PM / IP Logged  
I was wondering if anyone could give some guidance on how to install a Viper 5101.
Recently i had purchased a Viper 5101 online for my 2003 Dodge Ram 1500 regular cab.
The problem is it has no instructions. I did locate some info on here but the info is vague.
Such as door locks .I did get them to work but it took a couple of different diagrams and resistors. Couldn't get the headlights to work
Pretty much what I am getting at is could someone give me color to color info with diagrams.
I had never installed 1 before so I could use a little help
kreg357 
Platinum - Posts: 7,802
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: February 18, 2012 at 6:21 PM / IP Logged  

Not one of the easiest vehicles to do for a novice.  Here is a link to Bulldog Security :

  http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp
They have the wiring guide, special relay circuit diagrams and color pictures to assist you in the install.

Here is a link to the Viper 5101 Install Guide.  All Viper products are intended for professional

installation and this guide was written for them.    https://www.the12volt.com/installbay/file.asp?ID=830

You will need extra 30/40 Amp SPDT relays, resistors and possibly a transponder bypass module ( if

you have a Gray ignition key ).  A Digital Multi Meter and soldering gun will also come in very handy.

Soldering is fun!
opelap 
Member - Posts: 40
Member spacespace
Joined: November 08, 2010
Location: Montana, United States
Posted: February 21, 2012 at 11:45 PM / IP Logged  
Or go the more expensive but easier route and get a EVO-ALL with the Dodge harness, or the DEI CHALL and all of that resistor junk is taken care of.
stsymbal 
Member - Posts: 2
Member spacespace
Joined: February 18, 2012
Location: New York, United States
Posted: February 22, 2012 at 7:23 PM / IP Logged  
Well I already have the unit...Worked on it a little have the door locks working thanks to kreg357..
Will work on it some more probably this week if schedule allows.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer