Power Window Lock Out Switch

Home / the12volt's Install Bay / Miscellaneous - Off Topic / Power Window Lock Out Switch (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

J_keech13601

Member - Posts: 18

Joined: March 25, 2002

Location: United States

Posted: June 14, 2002 at 11:49 AM / IP Logged

I am looking for information on how to install a power window cut out switch for a 1988 Olds Delta 88. I want to disable the mainly the rear window switches with a master switch on the drivers side arm rest.

CTMobileMedia

Copper - Posts: 43

Joined: April 18, 2002

Location: United States

Posted: June 14, 2002 at 12:17 PM / IP Logged

Splice a relay inline on 1 wire to each window motor (up or down doesn't matter). Connect post #30 to the motor side of the splice, and #87a to the switch side. Connect post #85 to ground.Run a wire from the "lockout" switch to post #86. Connect the other side of the switch to 12V+.

Whenever the coils energize the circuit to the window motor is cut and therefore won't operate.

Dave

CT Mobile Media

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Power Window Lock Out Switch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.