diode

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / diode (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

werbs

Member - Posts: 1

Joined: April 23, 2010

Location: Utah, United States

Posted: September 10, 2012 at 12:43 AM / IP Logged

What diode do I need for this?

OR........

do you know of a better way to wire it that I would have this issue?

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: September 10, 2012 at 4:13 AM / IP Logged

Normally switching is used for isolation, though normally the same flasher can is used for flashers and hazards.

The switching does 3 things: change the can supply from normal (IGN) to constant; join left lamps to right; and bypass (short out) the left/right switch (ie, connect can output to L&R lamps).

Otherwise, a 5A diode should suffice.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

diode

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.