the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

best way to wire 4 battery panel


Post ReplyPost New Topic
< Prev Topic Next Topic >
radkonn 
Copper - Posts: 73
Copper spacespace
Joined: January 21, 2005
Posted: June 23, 2014 at 8:46 PM / IP Logged  
I want to add two more batteries for a total of 4 batteries supplying the house panel on a boat. The circuit is charged through an AC battery charger (plug it in at home) and not the alternator. My initial plan was just to add two batteries to the circuit and wire them in parallel (see first pic).
I wanted a little more control, so I am planning on adding another manual battery switch (Blue Sea). Do you see anything wrong with how I am going to wire it?
best way to wire 4 battery panel - Last Post -- posted image.
best way to wire 4 battery panel - Last Post -- posted image.
oldspark 
Gold - Posts: 4,913
Gold spacespace
Joined: November 03, 2008
Location: Australia
Posted: June 23, 2014 at 9:25 PM / IP Logged  
Why or when will you use the switch - what is its function?
The reason I ask is that (IMO) they are normally used as a backup - ie, when it's too difficult to push start a car or boat.
And maintenance involves the ability to isolate the string of interest.
From a load POV there is the desire to have as many batteries in parallel as possible to increase EACH battery's AH capacity as well as increasing battery life (thru lower discharge rate).
Against that comes the normal paralleling considerations - ie, should not be left paralleled when not in use; take out any faulty battery; etc.... IE - matched batteries with symmetric connections if permanently connected in parallel, and battery monitoring is essential (often for safety as well as battery life).
But otherwise, I presume you are symmetrically connecting the batteries even if not depicted as such in your -ve paths.
The only problem I see is if you switch one of your old batteries in parallel with a new one when not being charged (ie, especially when idle), but in such situations batteries never remain matched anyhow so it becomes the usual argument of degree. [I'm pretty sick of some of the persistent & moronic POVs on that issue!]

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer