the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper remote start /hazard flash


Post ReplyPost New Topic
< Prev Topic Next Topic >
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 03, 2015 at 4:27 PM / IP Logged  
this may be true when the vehicle is facing you, but what about from the back? you will have no indication at all. your installer is cutting corners.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
banthonyb71 
Member - Posts: 32
Member spacespace
Joined: January 31, 2015
Location: Michigan, United States
Posted: February 03, 2015 at 6:14 PM / IP Logged  
+1. Your installer fed you that line because he is being lazy.
As stated you will have no back lights and also you will find, when you are starting the car when it is dark, depending on where it is parked, your headlights will be shining directly into someone window or car when the parked facing you. It annoys people to death.
This is why as industry standard we "Always" tie into the parking lights, it notifies you from all 4 corners and doesn't blind people for 20 minutes while the customer waits for there car to warm up. and this fix can easily be accomplished with an additional 20 minutes of install time.   
Where not making this stuff up. We know installers and the game.
njzfinestg 
Member - Posts: 9
Member spacespace
Joined: November 16, 2011
Location: New Jersey, United States
Posted: February 03, 2015 at 7:43 PM / IP Logged  
all back lights come one.
i did mention it to him the options that were listed but he said that this was the only way.
installer was a co-worker of my friend at a car dealership that i bring my other car to and did it after hours on the side.
wish you knowledgable guys were around here!!
banthonyb71 
Member - Posts: 32
Member spacespace
Joined: January 31, 2015
Location: Michigan, United States
Posted: February 03, 2015 at 8:00 PM / IP Logged  
njzfinestg wrote:
he said that this was the only way.
What he meant to say was, "This is the only way....that I'm familiar with)
It is 100% not the only way
https://www.directechs.com/repository/tech_docs//Document10034-2038.pdf
banthonyb71 
Member - Posts: 32
Member spacespace
Joined: January 31, 2015
Location: Michigan, United States
Posted: February 03, 2015 at 8:06 PM / IP Logged  
print him out that page and see if he'll finish the job, its one thing if it was done as a favor but if you paid for it, tell him you want it done right.
It's literally 1 wire, through the firewall grommet to the relay, he doesnt even have to solider it, he can just rap it around the pin and push the relay back in.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer