the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

DIY car audio noise


Post ReplyPost New Topic
< Prev Topic Next Topic >
doris212 
Member - Posts: 1
Member spacespace
Joined: September 25, 2016
Location: Washington, United States
Posted: September 30, 2016 at 2:26 AM / IP Logged Link to Post Post Reply Quote doris212
I have a hobby in electrical engineering so I built my own car audio system given the fact that it didn't have any before. It's basically two pairs of PC speakers adapted with some resistors and regulators to work on DC 11-15V from my car. In order to eliminate any ripple and noise I have added http://www.kynix.com/Product/36.html">a 4700 uF capacitor in parallel with the power wires. Like this (excuse the paint drawing)
DIY car audio noise - Last Post -- posted image.
They are low power enough (around 30W max) to work without any noise when the car is running (noise induced by the alternator) as well as when it's on battery only (of course, no noise).
My problem is when the device i'm using is charging from the SAME power lines, all the noise-filtering the capacitor is doing suddenly vanishes.
This is when my problem occurs:
DIY car audio noise - Last Post -- posted image.
My skills aren't advanced enough to figure out what's going on, so I'm asking here after 1 month of research: How do i eliminate the ripple from when my device is charging and plugged into the audio system at the same time?
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: October 22, 2016 at 10:29 AM / IP Logged Link to Post Post Reply Quote DYohn
No offense but the best solution would be to install car audio equipment. :)
You have a ground loop, likely because the powered computer speakers use power neutral and speaker negative in parallel. You likely will not be able to fix that.
Support the12volt.com
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
conpar 
Stock Boy - Posts: 2
Stock Boy spacespace
Joined: October 31, 2016
Location: Ontario, Canada
Posted: October 31, 2016 at 1:04 AM / IP Logged Link to Post Post Reply Quote conpar
Great links.. Thanks for sharing

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer