Avital 5305 remote, glass break sensor icon?

Home / the12volt's Install Bay / Car Security and Convenience / Avital 5305 remote, glass break sensor icon?

Welcome Guest :)

Members

< Prev Topic Next Topic >

scottjvincent

Member - Posts: 3

Joined: June 17, 2017

Location: Washington, United States

Posted: June 17, 2017 at 8:55 AM / IP Logged

I just bought a avital 5305, got it wired up and everything works perfect, i have the shock sensor as zone 2 (blue wire) and a dei field disturbance sensor on zone 4(green mux wire)

Question is i see on the remote it was a special icon for glass break sensor(cracked back window icon) and for a tilt sensor it looks like (arrow pointing at back tire)

How do you use these 2 sensors?

Does the glass break put out a special signal so alarm knows it's the glass/tilt sensor?

Cuz from my understanding those two sensors would wire up to the green mux input well as my already installed motion sensor... How would it know the difference to display the glass/tilt icon?

Thanks

Scott v

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.