the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

3 Solenoids, Only 1 Active At A Time


Post ReplyPost New Topic
< Prev Topic Next Topic >
hibrick 
Member - Posts: 6
Member spacespace
Joined: September 17, 2021
Location: Pennsylvania, United States
Posted: September 17, 2021 at 6:58 AM / IP Logged Link to Post Post Reply Quote hibrick
I need to have a simple wiring to wire a control for 3 individual solenoids that are normally closed. I need to power on with switch, but use one of 3 momentary buttons to select which solenoid will be turnt on. But I need to have other 2 solenoid to be turned off when any one button is selected to be on. Basically only one possible active at a time for quick selection. I can't seem to wrap my head around how to configure this...this is a DIY boat livewell project I am conceiving. Thanks for any help.
Working hard or hardy working.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: September 17, 2021 at 8:55 PM / IP Logged Link to Post Post Reply Quote i am an idiot
We need info on at least the type of solenoids you have. When you apply power and remove power does it return to it's normal state or does it require the polarity to be reversed in order to go back to normal?
hibrick 
Member - Posts: 6
Member spacespace
Joined: September 17, 2021
Location: Pennsylvania, United States
Posted: September 18, 2021 at 6:46 AM / IP Logged Link to Post Post Reply Quote hibrick
Electric Solenoid Valve Normally Closed
DC12v
working current 420ma
coil resistance 27.7
rated power 5w.
Automatically closes without power.
Working hard or hardy working.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: September 18, 2021 at 7:51 PM / IP Logged Link to Post Post Reply Quote i am an idiot
You said momentary switch. Is that momentary switch energizing some kind of latching relay? Or is it just a momentary setup?
hibrick 
Member - Posts: 6
Member spacespace
Joined: September 17, 2021
Location: Pennsylvania, United States
Posted: September 18, 2021 at 11:06 PM / IP Logged Link to Post Post Reply Quote hibrick
Just a momentary switch.
Unless there is a better option.
Generally I want it to work kinda like a KVM switch box.one button active at a time, selection of a different button turns off the previous active button.
Working hard or hardy working.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: September 20, 2021 at 5:25 PM / IP Logged Link to Post Post Reply Quote i am an idiot
What is going to keep it on if it is just a momentary switch.
hibrick 
Member - Posts: 6
Member spacespace
Joined: September 17, 2021
Location: Pennsylvania, United States
Posted: September 20, 2021 at 6:19 PM / IP Logged Link to Post Post Reply Quote hibrick
Not sure. I need a switch that can be disabled/turned off when another is pushed... not sure how to do so. Figured there was a way to make a momentary switch preform the activation of its Solenoid until another momentary switch is selected to select another Solenoid. Maybe I am barking up the wrong tree.
If I could wire a KVM switch to handle 12 volt... that would be my fix.
Working hard or hardy working.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: September 20, 2021 at 9:54 PM / IP Logged Link to Post Post Reply Quote i am an idiot
So you need a momentary switch to latch till another one is pressed, and it stay latched till another is pressed. Is that correct?
hibrick 
Member - Posts: 6
Member spacespace
Joined: September 17, 2021
Location: Pennsylvania, United States
Posted: September 21, 2021 at 8:25 AM / IP Logged Link to Post Post Reply Quote hibrick
3 Solenoids, Only 1 Active At A Time - Last Post -- posted image.
So I think I figured how to do 2 solenoids and 2 momentary switches. For now I think I have a working plan.
Working hard or hardy working.
hibrick 
Member - Posts: 6
Member spacespace
Joined: September 17, 2021
Location: Pennsylvania, United States
Posted: September 21, 2021 at 6:18 PM / IP Logged Link to Post Post Reply Quote hibrick
So I corrected the previous...3 Solenoids, Only 1 Active At A Time - Last Post -- posted image.
Worked on my bread board!
Working hard or hardy working.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer