94 Mazda 626 wiring diagram?

Home / the12volt's Install Bay / General Discussion / 94 Mazda 626 wiring diagram? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jagger

Member - Posts: 4

Joined: June 20, 2002

Location: Canada

Posted: June 25, 2002 at 8:25 PM / IP Logged

I'd like to install an alarm with ingition disable, does anyone have a wiring diagram for a 94 Mazda 626 LX-V6?

Also, I was wondering if anyone has any experience with connecting the alarm to this car's power door lock system. Right now, to unlock all the doors, the driver door lock needs to be manually raised from inside or with the key from outside.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 25, 2002 at 11:23 PM / IP Logged

Mazda

626

1993-1994

Remote Starter Wiring Colors and Notes
Function		Vehicle Color	Location
Start:		YELLOW	IGNITION SWITCH HARNESS
Ignition #1:		BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #2:		BLACK/ RED	IGNITION SWITCH HARNESS
Ignition #3:		N/A
Accessory:		BLUE	IGNITION SWITCH HARNESS
Brake Light:		WHITE/ GREEN (+)	SWITCH ON BRACKET ABOVE BRAKE PEDAL
Tach Signal:		YELLOW	DISTRIBUTOR OR DATA LINK CONNECTOR
Parking Lights:		ORANGE	(+) AT RELAY OR FUSE/JUNCTION BOX
Headlights:		RED / BLACK (LO)	RED / WHITE (HI) AT HEADLIGHT SWITCH(+)
OEM Alarm Disarm:		YELLOW/RED (-)	DRIVER KICK PANEL OR IN DRIVER'S DOOR
OEM Alarm Arm:		N/A
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Data Link Connector Located On Side Of Fuse/Relay Block On Driver Front Inner Fender Panel Behind Battery.

Mazda

626

1993-1994

Alarm and Keyless Entry Wiring Colors and Notes
Function		Vehicle Color	Location
Constant +12 Volts:		BLACK/ BLUE	IGNITION SWITCH HARNESS
Starter Kill:		YELLOW	IGNITION SWITCH HARNESS
Ignition +12 Volts:		BLACK/ WHITE	IGNITION SWITCH HARNESS
Dome Lights/Superv:		RED / WHITE (-) ANY PIN	SWITCH OR FUSE/JUNCTION BLOCK
OEM Horn:		GREEN/ ORANGE (-)	STEERING COLUMN HARNESS OR AT RELAY
Power Lock:		ADD ACTUATOR	IN DRIVER'S DOOR **
Power Unlock:		ADD ACTUATOR	IN DRIVER'S DOOR **
Trunk Release:		N/A
Alarm Input Wire:		RED / WHITE (-) ANY PIN	SWITCH OR FUSE/JUNCTION BLOCK
Notes:	** - Add Actuator Door Lock

You need to add an actuator for the door lock system to operate via remote control . Look here for starter disable: https://www.the12volt.com/info/diagrams.asp#si

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94 Mazda 626 wiring diagram?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.