the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

White wire from MSD 6A box as killswitch?


Post ReplyPost New Topic
< Prev Topic Next Topic >
phamine 
Copper - Posts: 88
Copper spacespace
Joined: March 19, 2003
Location: United States
Posted: July 01, 2003 at 11:48 PM / IP Logged  

http://www.msdignition.com/pdf/6series.pdf

Found on Page 6. Is this Just as good as using relays for ignition kill?

rudbwoy69camaro 
Silver - Posts: 350
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: June 10, 2003
Location: United States
Posted: July 02, 2003 at 8:26 AM / IP Logged  
Anything to cut off continuity to a circuit that powers the ignition/starter.   Hiding it though; a good, well thought of place that no one would know to look. 
mr12volt 
Member - Posts: 28
Member spacespace
Joined: June 17, 2003
Posted: July 02, 2003 at 7:57 PM / IP Logged  
Use Both.  Switch on msd and relay for starter-kill off of alarm.
phamine 
Copper - Posts: 88
Copper spacespace
Joined: March 19, 2003
Location: United States
Posted: July 03, 2003 at 12:26 PM / IP Logged  

White wire from MSD 6A box as killswitch? - Last Post -- posted image.

I'm trying to figure out how to wire it using a momentary switch. The theft detterent on the MSD box only cuts spark when the white wire is grounded. A switch has to be activated in order to start in my diagram. The thing is it has to use a toggle switch. The white wire must stay unground in order for the car to have spark. I'm guessing I'm supposed to use another relay to get it to work, but how would I wire it so.  Also, If I were to wire it to a a parking switch or any accessory as a switch, how would I wire it? The diagrams on the site are normally open configuration.

Also, what's the radio accessory wire on a 94 Honda Prelude. Is it the switch 12volts yel/red wire?

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1994&make=Honda&model=Prelude&ID=18001&type=Stereo

White wire from MSD 6A box as killswitch? - Last Post -- posted image.

phamine 
Copper - Posts: 88
Copper spacespace
Joined: March 19, 2003
Location: United States
Posted: July 03, 2003 at 12:29 PM / IP Logged  

Here's the diagram actually:

https://images3.fotki.com/v29/photos/2/22469/45074/untitled-vi.jpg


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer