the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

speaker question again


Post ReplyPost New Topic
< Prev Topic Next Topic >
msf145 
Copper - Posts: 59
Copper spacespace
Joined: January 01, 2003
Location: United States
Posted: July 30, 2003 at 9:24 PM / IP Logged  
i am putting components in the door panel of a 97 eclipse. im plan on mounting the xover in the car rather than the door. but i still need to manuever the wire to the door. is there an easy way to do this. i cant seem to get through the opening where the other wires go through. its an actaully harness plug where the boot inbetween the door and car is. is my only option to drill? it seems hard to get a drill in there. leave me some feed back of an easy way. if there is an easy way.
sonicsound 
Copper - Posts: 100
Copper spacespace
Joined: July 08, 2003
Location: Wisconsin, United States
Posted: July 30, 2003 at 11:58 PM / IP Logged  
Your best bet would be to leave that xover in the paneling of the car that way you don't have t run wires through the grommet of the door.  It's a lot easier and a lot quicker to do it that way.  Otherwise I don't believe there is an easy way to do it the way you want to do it....Hope that helps....
Sonic
Pioneer AVH-P4000DVD
Zapco 360.4
Zapco 500.1
Zapco SP-4SL Processor
Two JL 10 W3v3d2
Alumapro 15 Farad Cap

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer