Switched positive to HU question

Home / the12volt's Install Bay / Car Audio / Switched positive to HU question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

csq33r

Member - Posts: 16

Joined: September 26, 2003

Location: Canada

Posted: October 29, 2003 at 5:39 PM / IP Logged

My car has quite a mass of wiring and the previous install did not have a switched positive at the HU. I've found one, but with the ignition in the off position, this positive turns into a ground. Is this OK?

Thanks.

Esprit907

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: October 29, 2003 at 10:03 PM / IP Logged

The wire you are looking for should be hot (+12V) when the car is in acc and run, ground when off and start.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

csq33r

Member - Posts: 16

Joined: September 26, 2003

Location: Canada

Posted: October 29, 2003 at 10:45 PM / IP Logged

Thanks, just what I needed to know.

Esprit907

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Switched positive to HU question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.