adding amp to factory headunit 02 Trailblazer

Home / the12volt's Install Bay / Car Audio / adding amp to factory headunit 02 Trailblazer (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Elliesguy

Member - Posts: 20

Joined: August 12, 2003

Location: United States

Posted: November 09, 2003 at 8:51 PM / IP Logged

I have a 2002 Chevy trailblaer. I've probed all the wires for a sufficiant remote turn on. but have not found one. My head unit stays on when the key is takin out untill you open the door, dont know if that matters, please help, thanks..

eju

4jwv

Member - Posts: 1

Joined: November 08, 2003

Location: United States

Posted: November 10, 2003 at 9:01 AM / IP Logged

Elliesguy wrote:

I read somewhere that you will need to tap into a hot, when ignition is on wire. Do you know what the speaker wire color codes are for a 2002 Trailblazer non- bose headunit? I am getting ready to install a 4 channel amp and new speakers. Good luck with your install. Jeff

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

adding amp to factory headunit 02 Trailblazer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.