doorlock/unlock for 96' nissan quest

Home / the12volt's Install Bay / Car Security and Convenience / doorlock/unlock for 96' nissan quest (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

UncleJohnzy

Member - Posts: 16

Joined: October 29, 2003

Location: United States

Posted: January 19, 2004 at 1:16 PM / IP Logged

Any help would be appreciate on locating lock/unl wire on 96 nissan quest. It shows positive on some wire i found, but i need neg wires.

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: January 19, 2004 at 1:26 PM / IP Logged

1996 Nissan Quest Alarm Information

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 19, 2004 at 2:03 PM / IP Logged

POWER LOCK|GREEN / WHITE |- |left kick or console

POWER UNLOCK|GREEN/ orange |- |left kick or console

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

dfiddy

Copper - Posts: 162

Joined: August 17, 2002

Location: Canada

Posted: January 19, 2004 at 10:18 PM / IP Logged

i just did a 94 villager, which is the same platform and i can agree with the wire colors,location, and polarity. If you go to the console you can also catch the park lights there too. Maybe even the door triggers but not too sure.

UncleJohnzy

Member - Posts: 16

Joined: October 29, 2003

Location: United States

Posted: January 20, 2004 at 10:26 PM / IP Logged

k, here's the problem

both wires shown positive when i hit the lock/unlock switch. my unit only support neg. so i did reverse polarity, still it don't work right.

any idea how to wire this properly?

dfiddy

Copper - Posts: 162

Joined: August 17, 2002

Location: Canada

Posted: January 20, 2004 at 10:35 PM / IP Logged

really? Did you try the kick and the console? Cause pretty sure they are neg. I went in the kick, but I found them in the console as well. Keep lookin' for the same wire colors and test all of them you can find.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 22, 2004 at 4:17 PM / IP Logged

yes they will show 12v...til you put a neg triger to them. then they will trip

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

doorlock/unlock for 96' nissan quest

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.