Remote Car Starter Wiring Problems

Any help on this would be great. 

I had a 1988 Dodge Shadow with a remote car starter in it,  I then crashed the car and got the car starter removed.  The problem is now I have no wire diagram to install it on a different vehicle. 

It came off a 1988 Dodge Shadow - with power trunk and doors hooked up and I want to install it on a 1988 Chev s-10 - with no power doors or truck.

Another problem is that I have no idea what kind of starter this is,  no name on it or keychain anywhere.  I think it might be a 'Whistler' if that is even a brand.

Here is what I have to work with,  thanks in advance for your help.

Mike

Sorry,  the question is,  can anyone help me out, and tell me which wires are which?

4-Pin Harness - Thick Wire

White-

Pink-

Red-

Yellow-

13 Pin Harness

Red-

Black-

Brown-

Blue-

Yellow-Either Hood switch or tach wire

Green-Either Hood switch or tach wire

PURPLE / White-Cut short, not used?

BROWN / White-Cut short, not used?

GREEN / WHITE-

GREEN/ Black-

Blue/White-Cut short, not used?

Blue/Black-Cut short, not used?

WHITE/ Orange-Cut short, not used?

mr_fusion, i figured out its a Whistler,  but I can't find their website anywhere,  all I can see is a site for theoir radar detectors.

but i tried installing it today and it works fine without those 2 things hooked up. 

so thanks for all your help

mike