the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 Rodeo installing Crimestopper 2015fm


Post ReplyPost New Topic
< Prev Topic Next Topic >
bucsfan97 
Member - Posts: 2
Member spacespace
Joined: February 23, 2004
Location: United States
Posted: February 23, 2004 at 2:05 AM / IP Logged  

This is my first alarm install... I picked one with all the tricks.... 

A couple questions

1)Do I need both Ignition wires 1&2 (the manual says if necessary)

2)Manual says to use external relays for High Current Ignition and/or Accessory circuit greater that 30A. Will I be OK going with the installed relays with the alarm?

3)Both main RED power wires to the brain (30A) The manual says to hook to battery ... can I tie those in at the switch wiring harness along with Starter, Ignition1,Ignition2,  Accessory. I have @ the switch 2 constant battery feeds??

4)I dont have a factory alarm but the wiring diagram I downloaded of the net shows a factory disarm wire yellow/blue (-) in the driver kick panel in a white plug... Do I still need to find this wire and hook it up to the crimestopper alarm prior to remote start

Thanks for any help I would probably be able to figure these things out myself but there is that possibility of messing something up

bucsfan97 
Member - Posts: 2
Member spacespace
Joined: February 23, 2004
Location: United States
Posted: February 23, 2004 at 2:09 AM / IP Logged  
"""""""""

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|white, WHITE/ black  |+  |ignition harness            |
|          STARTER|BLACK/ white         |+  |ignition harness            |
|         IGNITION|BLACK / YELLOW        |+  |ignition harness            |
|  SECOND IGNITION|BLACK/ red           |+  |ignition harness            |
|        ACCESSORY|blue                |+  |ignition harness            |
|       POWER LOCK|lt. GREEN/ red       |-  |DKP white 22 pin connector  |
|     POWER UNLOCK|RED / blue            |-  |DKP white 22 pin connector  |
|       LOCK MOTOR|blue/red            |   |drivers door harness        |
|     UNLOCK MOTOR|blue/white          |   |drivers kick panel *1       |
|    DISARM DEFEAT|blue                |   |passenger kick panel *2     |
| PARKING LIGHTS +|GREEN/ red           |   |drivers kick in a black plug|
| PARKING LIGHTS -|yellow or grn/yel   |   |steering column             |
|       HEADLIGHTS|red or RED / blue     |-  |steering column             |
|     DOOR TRIGGER|RED / green           |-  |drivers kick in a white plug|
| DOME SUPERVISION|use door trigger    |   |                            |
|  TRUNK/HATCH PIN|tied in with door   |   |                            |
|         HOOD PIN|GREEN/ red           |-  |keyless module *3           |
|TRNK/HTCH RELEASE|lt. green           |   |keyless module *3           |
|  FCTRY ALARM ARM|purple *5           |-  |drivers kick in a white plug|
|FCTRY ALRM DISARM|yellow/blue *5      |-  |drivers kick in a white plug|
Notes:  Is up to the installer to test all wire whenever possible with a DDM

*1 In a white 10 pin connector  *2 Located up high in a white connector  *3 The keyless module is located to the right of the glove box. *5 Trigger the power lock and the factory alarm arm wires at the same time to arm the alarm.  Trigger the power unlock and the factory alarm disarm wires at the same time to disarm the alarm.

Luis

Sound Waves   """""""

This is a post I found on the wire diagram

Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: February 23, 2004 at 2:15 AM / IP Logged  
to answer the alarm disarm wire question, if you have no factory alarm then you dont have to hook up to it and in fact the wire probally doesnt even exist

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer