the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

where is trunk pin wire for 91 mr2?


Post ReplyPost New Topic
< Prev Topic Next Topic >
voltageGSR 
Member - Posts: 16
Member spacespace
Joined: October 13, 2003
Location: Pennsylvania, United States
Posted: May 28, 2004 at 4:38 PM / IP Logged  
can't find the turnk pin wire anyway
supposedly RED / green
looked EVERYWHERE
any help?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 28, 2004 at 5:57 PM / IP Logged  
Notes tell me it's at the teft unit module.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
forbidden 
Platinum - Posts: 5,353
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: May 28, 2004 at 7:41 PM / IP Logged  
You know, I have a 93 MR2 and I have never had need for an alarm system in it, if I have some time I'll poke around and see what I can find. Jeff is right though, find the factory alarm module and the wires should be there.
Top Secret, I can tell you but then my wife will kill me.
voltageGSR 
Member - Posts: 16
Member spacespace
Joined: October 13, 2003
Location: Pennsylvania, United States
Posted: May 29, 2004 at 4:48 AM / IP Logged  
I tried finding the factory theft module. I know I have one because it use to go off randomly until I fixed something in the driver door.
I cannot find the module ANYWHERE. If you know where this module is - please let me know - I must be dumb!
thanks.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 29, 2004 at 10:18 AM / IP Logged  
It should be located at the passenger side B-Pillar ( the wire that is ).
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
jimmeezgolfvr6 
Silver - Posts: 258
Silver spacespace
Joined: March 10, 2002
Location: Canada
Posted: May 29, 2004 at 12:06 PM / IP Logged  
passenger side b-pillar should also be the location of the factory anti-theft unit.
Helpme9 
Member - Posts: 34
Member spacespace
Joined: May 29, 2004
Posted: May 29, 2004 at 7:15 PM / IP Logged  
if you need the front hood for a mr2 91 - 95 let me know i have one thanks!
voltageGSR 
Member - Posts: 16
Member spacespace
Joined: October 13, 2003
Location: Pennsylvania, United States
Posted: June 01, 2004 at 2:17 PM / IP Logged  
what is the B-piller. Use to honda's - I have no idea where that is. Next to shift boot?
customsuburb 
Gold - Posts: 1,813
Gold spacespace
Joined: January 17, 2004
Location: United States
Posted: June 01, 2004 at 6:51 PM / IP Logged  
Your b pillar on the passenger side would be the like where the front passenger seat belt is bolted too. That big support is the b pillar, and the wire and/or alarm module are probobly located at the base of it.
voltageGSR 
Member - Posts: 16
Member spacespace
Joined: October 13, 2003
Location: Pennsylvania, United States
Posted: June 02, 2004 at 10:00 PM / IP Logged  
thanks for all the help. got tired - so just ran my own wire. alarm trigger works perfect.
thanks!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer