DEI 555l Installation

what is the pink and blue/black wire called?Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

The pink wire goes to your true ignition & the blue/black goes to your (-)200m output of your alarm....Hope this helps!!!!!!!!!

sorry let me be more specific.  the blue/black wire from the 555l which is status input wire, where does it go to?  the - out when started, or - pulse out after remote start, or - pulse out before remote start.  which one?  and does the pink wire, ingition input go to key side ignition input, or starter side output? 

status input- ingnition 3(-), status(-). look at ur alarm to see if it has it. any wire that pulse (-) when remote start or right b4 remtoe start. the pink wire- if says to the ignition side, then youre suppose to cut a wire at the transponder ring (locate at the key cylinder). theres suppose to be two wire, pink and something that goes each end. i hope you know what i mean. look at the diagram, and youll see that one of the wire is being cut. it specify which wire goes which, keyside of igniton side. Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).