kenwood kvt-911dvd

Home / the12volt's Install Bay / Car Audio / kenwood kvt-911dvd (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

powerhx2

Member - Posts: 13

Joined: April 25, 2004

Location: United States

Posted: July 11, 2004 at 6:24 PM / IP Logged

does any have a kenwood kvt-911dvd in the car. if so , do u know the order of the wires that go behind the unit it self.

i know the colors are red,yellow,orange,black,and green. can sum 1 help... i have lost my harness

kvt-911dvd

2 Autotek Stealth xs.1500's

2 yellow top

2 MTX 3'' 2 ways

2 6x9 alpine type r's

2 15's poweramper xp^2

alpine mrv-f407 4 channel

150 amp anl fuse

Back to Top

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: July 11, 2004 at 8:58 PM / IP Logged

Do you mean the plug that goes into the main brain box, it's just a standard Kenwood harness. If you mean the wire that interconnects the two boxes, your best bet is to order a replacement. Then there's the little power plug.

Back to Top

powerhx2

Member - Posts: 13

Joined: April 25, 2004

Location: United States

Posted: July 12, 2004 at 1:34 AM / IP Logged

it is the power supply for the monitor it self

it is a 8 pin harness but only 5 wires come out of it

thanks..........Isaac

kvt-911dvd

2 Autotek Stealth xs.1500's

2 yellow top

2 MTX 3'' 2 ways

2 6x9 alpine type r's

2 15's poweramper xp^2

alpine mrv-f407 4 channel

150 amp anl fuse

Back to Top

crudeau

Copper - Posts: 150

Joined: August 25, 2003

Location: United States

Posted: July 12, 2004 at 9:10 AM / IP Logged

I have one in my mustang. I don't recall the wires. But i do know all kenwoods use the same wire colors.

You should have a Black, yellow, red. Black is ground, and someone else chime in... yellow and red, one is 12+constant and one is switched 12+

What are the other two colors you have. I would assume one is a dimmer, and other is power antenea. But I don't remember

Back to Top

powerhx2

Member - Posts: 13

Joined: April 25, 2004

Location: United States

Posted: July 12, 2004 at 3:25 PM / IP Logged

i know that red is switched power, yellow is constant, black is ground, orange is dimmer, and green is a ground also. i need to know the order of which these wires go in, i have lost my clip and i need to know the order.

kvt-911dvd

2 Autotek Stealth xs.1500's

2 yellow top

2 MTX 3'' 2 ways

2 6x9 alpine type r's

2 15's poweramper xp^2

alpine mrv-f407 4 channel

150 amp anl fuse

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood kvt-911dvd

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.