the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

How many watts?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Thack79 
Silver - Posts: 526
Silver spacespace
Joined: December 02, 2003
Location: Virginia, United States
Posted: October 25, 2004 at 1:47 PM / IP Logged  

Ive have eight interior speakers that I want to connect to an autotek amp. What is the best way (most wattage) to get from them connected to one amp with the specification below. ( i dont have the space to add another amp right now How many watts? - Last Post -- posted image.)The speakers are 4 ohm 50 rms.

Autotek 2200

  • 125 Watts X 2 Channels @ 4 Ohms
  • 200 Watts X 2 Channels @ 2 Ohms
  • 250 Watts X 2 Channels @ 1 Ohm
  • 400 Watts X 1 Channel @ 4 Ohms Bridged
  • 500 Watts X 1 @ 2 Ohms Bridged
  • forbidden 
    Platinum - Posts: 5,353
    Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
    Joined: November 01, 2003
    Location: Alberta, Canada
    Posted: October 25, 2004 at 1:48 PM / IP Logged  

    Post the speakers, brand and model# please. Waht vehicle are they going into and where are you planning on mounting them.

    Top Secret, I can tell you but then my wife will kill me.
    Thack79 
    Silver - Posts: 526
    Silver spacespace
    Joined: December 02, 2003
    Location: Virginia, United States
    Posted: October 25, 2004 at 1:50 PM / IP Logged  
    the speakers are 4 pioneer 6x9s (rear deck)  and 4 pioneer 6's are well (doors and rear panel).
    jeffchilcott 
    Platinum - Posts: 2,483
    Platinum spacespace
    Joined: April 11, 2002
    Location: United States
    Posted: October 25, 2004 at 5:59 PM / IP Logged  
    why do you want to run 8 speakers?     I think you would be alot better off ditching the 8 speakers, and going with 2 sets of componenet speakers...I am running 4 6.5 inch component sets    (alpine type r) and most people wouldnt be able to touch that   at the expensive of fader control you could create 2    2ohm loads for your amp
    2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
    2007 USACI World Champion
    2007 World Record
    2006 USACI Finals 2nd Place
    stevdart 
    Platinum - Posts: 5,816
    Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
    Joined: January 24, 2004
    Location: Pennsylvania, United States
    Posted: October 25, 2004 at 6:05 PM / IP Logged  

    Best way is to run the amp at 4 ohms to two good speakers. 

    But just for the sake of figuring this out...best way is to run 4 to each side at 4 ohms, 31 watts per speaker.  The highest power, though, is to run 4 speakers on each side at 1 ohm.  Ohh, the sound, I don't want to hear it.  Can't be good, no it can't.

    For a 4 ohm stereo load, 125 watts per channel:  use option two on each side of the car.  For the highest power, 250 watts per side (62 WRMS per speaker, slightly over their rated RMS) use the first wiring diagram on each side of the car.

    How many watts? - Last Post -- posted image.

    But we can't help but wonder....Why?

    Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
    kfr01 
    Gold - Posts: 2,121
    Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
    Joined: April 30, 2003
    Posted: October 25, 2004 at 8:35 PM / IP Logged  

    Also scratching my head and wondering why.  The most I'd go is 2 pair of mid/high drivers.  This is not a situation where more = better sound. 

    New Project: 2003 Pathfinder
    Thack79 
    Silver - Posts: 526
    Silver spacespace
    Joined: December 02, 2003
    Location: Virginia, United States
    Posted: October 26, 2004 at 6:56 AM / IP Logged  

    The wholes were there to do it and the speakers were sitting in the house. Just wanted some opinions. Thanks guys.

    heavilymedicate 
    Silver - Posts: 328
    Silver spacespace
    Joined: August 05, 2004
    Location: Texas, United States
    Posted: October 26, 2004 at 11:07 AM / IP Logged  

    The "holes" were there to do it?  So wtf was the last guy thinking?  Sounds like some kid who wants his sh*t to be "loud".  yuck!

    Thack79 
    Silver - Posts: 526
    Silver spacespace
    Joined: December 02, 2003
    Location: Virginia, United States
    Posted: October 26, 2004 at 12:25 PM / IP Logged  
    Exactly heav.   it was either have some holes in the back rear deck or get a third amp.  not to many options there
    ScoutnBout 
    Member - Posts: 11
    Member spacespace
    Joined: October 24, 2004
    Location: United States
    Posted: October 26, 2004 at 2:30 PM / IP Logged  

    ---The holes were there to do it? Is it possible he had more than one amp wired for the rear at one time? This would have been more professional from what I have heard from the boys who I knew that installed systems 10 years ago. Two amps for the rear, one for each side, one amp for the mids and the pillar/panel tweeters at normal power from the head. Are there other holes in the floor that would lead you to believe he had moe than one amp set up for the rear?

    ---Don't ask me though, things are surely different now, just interested in the topic and wanting to learn more. I'm new at all this. As per usual, food for thought.


    Sorry, you can NOT post a reply.
    This topic is closed.

      Printable version Printable version Post ReplyPost New Topic
    You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot delete your posts in this forum
    You cannot edit your posts in this forum
    You cannot create polls in this forum
    You cannot vote in polls in this forum

    •  
    Search the12volt.com
    Follow the12volt.com Follow the12volt.com on Facebook
    Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
    Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

    Secured by Sectigo
    the12volt.com spacer
    the12volt.com spacer
    the12volt.com spacer
    Support the12volt.com
    Top
    the12volt.com spacer
    the12volt.com spacer