2003 mitsubishi outlander

Home / the12volt's Install Bay / Car Security and Convenience / 2003 mitsubishi outlander (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Nonono333

Member - Posts: 22

Joined: September 15, 2002

Location: United States

Posted: October 08, 2002 at 8:13 PM / IP Logged

WOULD GREATLY APPRECIATE ANY WIRE SCHEMATICS FOR THE NEW OUTLANDER. FOR CAR ALARM.

steve p.

PDC guy

Member - Posts: 3

Joined: October 07, 2002

Location: Guam

Posted: October 23, 2002 at 2:25 AM / IP Logged

blue/red - 12volt ign harness

blue - ign ign harness

BLACK / YELLOW -starter ign harness

GREEN / WHITE - parking pos. @ dimmer switch

grey - dome trigger neg. right side of fusebox

L.GREEN/ red - lock driver's side kick panel neg. trigger

BROWN / red - unlock driver's side kick panel neg. trigger

note - no pass thru for siren wire, I ran it thru the driverside fender thru main harness run. Please test all wires with a meter before hooking anything up.good luck.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 mitsubishi outlander

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.