the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Hard wiring a power inverter


Post ReplyPost New Topic
< Prev Topic Next Topic >
AutoAcoustics 
Member - Posts: 11
Member spacespace
Joined: November 16, 2004
Location: United States
Posted: November 20, 2004 at 10:48 AM / IP Logged  

The way I normally hard wire is like this:

85--------ign and acc, diode isolated

86--------ground

30--------power to inverter

87--------12v

this way, you can use the PS with the car in the accessory position, but if you decide to start the car, it won't cut power to the PS, so you don't have to start a game or movie over.

Paul Walker
Auto Acoustics
Hillsborough, NC
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer