is it all here?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / is it all here? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Xplorer

Copper - Posts: 69

Joined: June 01, 2004

Location: United States

Posted: January 04, 2005 at 2:12 PM / IP Logged

I am new to fiberglassing and wanted to try it out so maybe down the line i could make a enclosure. If anyone has any links they could provide me with that has a step by step process of making one that would help. Also for materials/tools you would need...

Resin...Fiberglass Mat...Filler...Speaker Fabric/T-shirt...MDF...Brushes...Gloves...Paint...Sander...Jigsaw...Router... anything else?

Any hints or ideas would be appreciated.

Peace

archemedes

Copper - Posts: 172

Joined: September 08, 2003

Location: United States

Posted: January 04, 2005 at 6:24 PM / IP Logged

don't wear stuff you like or don't want fiberglass on

chris_h

Copper - Posts: 50

Joined: November 26, 2004

Location: Canada

Posted: January 04, 2005 at 11:35 PM / IP Logged

ha good tip archemedes,

check this site out for basics http://web.njit.edu/~cas1383/proj/main/

also, you'll want a mask and eye protection for sanding, and a dremel comes in handy if you can get your hands on one.

since it seems like you'd be interested in painting your enclosure, check out this place http://www.garbled.net/tim/fiberglass.html . I don't know why this web page is so retardedly formatted, but it seems to have some useful info.

When you step on the brakes your life is in your foot's hands

Xplorer

Copper - Posts: 69

Joined: June 01, 2004

Location: United States

Posted: January 05, 2005 at 1:14 AM / IP Logged

thanks for the links...very helpful

Peace

bluetruck

Copper - Posts: 115

Joined: December 26, 2004

Location: United States

Posted: January 06, 2005 at 8:09 AM / IP Logged

bubbles are bad... say no to bubbles

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

is it all here?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.