Autostart 2300 TW Tech Question

Home / the12volt's Install Bay / Car Security and Convenience / Autostart 2300 TW Tech Question (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 31, 2005 at 1:43 PM / IP Logged

Also, changinf tach locations may help as well.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sierra2700

Copper - Posts: 117

Joined: October 08, 2004

Posted: January 31, 2005 at 2:04 PM / IP Logged

Do I have to power up both 86 and 87 with seperate fused wires 12v wires or can I use a single fused 12 volt wire from the harness?

Also is there a way to test if powering up accessory 2 is the solution with out a relay temporarily? Like hooking up 12volts straight from battery to the second accessory wire?

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: January 31, 2005 at 2:14 PM / IP Logged

BTW, changing the crank time has nothing to do with tach... it just controls how long the RS unit cranks for... this is separate from learning tach.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sierra2700

Copper - Posts: 117

Joined: October 08, 2004

Posted: January 31, 2005 at 2:40 PM / IP Logged

Kgerry, do you know if it is possible to extend the crank time on "AUTOSTART" Units?

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 31, 2005 at 3:12 PM / IP Logged

Sierra2700 wrote:

Do I have to power up both 86 and 87 with seperate fused wires 12v wires or can I use a single fused 12 volt wire from the harness?

Also is there a way to test if powering up accessory 2 is the solution with out a relay temporarily? Like hooking up 12volts straight from battery to the second accessory wire?

One fuse for the two pins is OK.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: January 31, 2005 at 3:49 PM / IP Logged

the older ones you could but it doesnt look like you can on this series ( at least i'm looking at a 2500TW manual and you cant on it )....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Autostart 2300 TW Tech Question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.