the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 park ave security light


Post ReplyPost New Topic
< Prev Topic Next Topic >
motorsportsman 
Member - Posts: 3
Member spacespace
Joined: March 28, 2005
Location: United States
Posted: March 28, 2005 at 7:15 PM / IP Logged  

recently installed a remote starter on a 99 park ave and used a dei 555g to by pass the pk3 system.car starts fine every time with the remote starter however when the key is put into lock cylinder and turned ona few seconds later the security light comes on and stays on. when you start the car with the key the security light  acts normal (ie goes out). when the remote start starts the car the security light is not on. checked all connections everything seems right. the only discrepency i beleive their might be is the fact that there are two purple wires coming out of the pk3 module, i hooked into one of these per the 555g instructions and it is my understanding that either one will work.never tried to hook to the other untill i got some input as i dont want to just move connections around for no reason.

Any help is appreciated!

motorsportsman

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 28, 2005 at 9:29 PM / IP Logged  
Not familiar with the 555G but I know with some of the GM's that I've worked on, the module that I use has a jumper that needs to be inserted to work on certain models and inserted another way for other. If there are jumper's make sure that they are in the proper place. Another thing to look for is to ensure that the ground on the unit is goos as well as the key sense wire is hooked up to the right wire. ( if applicable)
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
mladams 
Copper - Posts: 57
Copper spacespace
Joined: April 11, 2004
Location: United States
Posted: March 28, 2005 at 10:07 PM / IP Logged  
I know in my experience with Chevy Passlock systems I have found that it is easily "tricked". If the connection between one or more of the wires disconnects during opperation it will throw a security light, even if the wire is reconnected. I wouldn't worry about it that much as long as the car runs fine with the key and while in remote start.  Most likely the computer resets itself every time the ignition shuts off anyway.  I would imagine that every time the remote start shuts down it is losing a connection between the wires that carry the "r" code.
Matt Adams
Electrical Engineer Major
York College of PA
Chevy Cavy Rally Sport
dare_ds69 
Silver - Posts: 419
Silver spacespace
Joined: January 25, 2005
Location: New Jersey, United States
Posted: March 29, 2005 at 7:31 AM / IP Logged  

i do remote starts for a gmc cadi dealers and i always use a 556u, i never have a problem and the key is easy to program

how own your mind, control your life.
MECP certified. always use a DMM
motorsportsman 
Member - Posts: 3
Member spacespace
Joined: March 28, 2005
Location: United States
Posted: March 29, 2005 at 6:26 PM / IP Logged  

Thanks for the info everyone. I did make sure the jumper was correct and double checked the ground. I thought about using the 556u but the owner had just paid $34  for an extra key and they didn't want to have to buy another.However  I have recently heard reports of trouble with the 555g and other dei bypasses so in the future I think I'll use the 556u or equivalent.

Thanks

motorsportsman


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer