mach 460 system

i need the premium sound wiring schematics for the 2000 ford mustang...any help would be appreciated...rounders

Tried to do one of these (mach 460 system) the other day and boy was it a pain in the butt.  I was putting in a subwoofer amp and using a LOC, so I used a speaker popper and found what I thought were the two pairs of wires for the rear speakers, but I forgot that there's component speakers for the rear, and they are crossed over in the factory amp, so  that means they have their own set of wires running from the factory amp and I had tapped into the tweeters, thus resulting in a total lack of low frequency sound (even though with the low pass filter turned off, you could hear vocals coming out of the subs).  I still haven't figured out which wires are for the rear woofers....any ideas?

That website is good but a little bit confusing. The rear woofer wires are hiding on the front of the mach cabinet hanging from the rear deck. It may be easiest to drop that cabinet down. The wire run is very short from the amp output to where it runs inside that cabinet for the rear woofers.