Proximity sensor

Home / the12volt's Install Bay / Car Security and Convenience / Proximity sensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

joelr7309

Copper - Posts: 97

Joined: September 23, 2002

Location: United States

Posted: December 16, 2002 at 11:13 AM / IP Logged

Hey guys, I'm installing a Proximity sensor on a 550esp viper alarm, just wondering how to do it right, I'm not sure if I should just jumper Proximity sensor to the main shock sensor, IF I do this , I heard you have to put a DIO between the green and blue wire so that it thinks it has its own address, what size of a dio do i put on or how do I connect it to the (-)neg multiplex blue wire on this 550esp, to the sensor, does anyone one have a diagram?

the rookie!~

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 16, 2002 at 12:07 PM / IP Logged

All you need to do is piggyback the appropriate wire ( pre-warn and/or full trigger ) and use a 1N4001 1 amp diode inline of the target wire. Determine what the polarity of the trigger wire is and install the diode band accordingly.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

joelr7309

Copper - Posts: 97

Joined: September 23, 2002

Location: United States

Posted: December 16, 2002 at 12:55 PM / IP Logged

Thanks JEff

Where can I buy this dio 1 amp from, like radio shake or some PEP BOYS?

the rookie!~

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 17, 2002 at 2:00 AM / IP Logged

They should have them. They are common components so you shouldn't have any problems finding ithem.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Proximity sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.