the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

02 Sequoia remote start with oem remote


Post ReplyPost New Topic
< Prev Topic Next Topic >
alarmpro 
Copper - Posts: 110
Copper spacespace
Joined: September 17, 2002
Location: United States
Posted: December 29, 2005 at 12:58 AM / IP Logged  
I just installed a remote start on my brothers 02 sequoia and everything works great... >>problem is that when the vehicle is remote started the remote no longer works>>> usually disabled for when you get into the vehicle?? Does anyone have experience with this problem.. I need to find the ignition wire on the factory keyless system to add a relay to cut this wire when the its remote started in order to no loose the functionality and to enable it to lock/unlock the doors and I used the valet 561t which uses the double pulse lock to remote start and which would be same double pulse lock to remote turn off/ but since the keyless is disabled once the vehicle is remotely turned on then hence my problem !!!!
any suggestions>>>> any help appreciated!!
autoobsessionny 
Member - Posts: 11
Member spacespace
Joined: December 29, 2005
Location: United States
Posted: December 29, 2005 at 1:17 AM / IP Logged  
All Toyota / Lexus cars have this problem. Whenever a remote start is needed We just install a full remote start system with keyless entry. Thats your best bet.
Auto Obsession
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: December 29, 2005 at 6:24 AM / IP Logged  
I do a lot of these and have never found a way around it. I think the factory Keyless is part of the actual BCM. I doubt there is a solution. Bottom line is a key must be used to enter the car....
Mike M2
Tech Manager
CS Dealer Services
Teamrf 
Gold - Posts: 1,031
Gold spacespace
Joined: January 13, 2004
Location: United States
Posted: December 29, 2005 at 3:38 PM / IP Logged  
Yea I haven't gotten around this problem either.
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: December 29, 2005 at 6:06 PM / IP Logged  
Me either....better to just install a system with everything on the aftermarket remote.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer