the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Running RCAs next to speaker wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
tym1200 
Member - Posts: 13
Member spacespace
Joined: March 21, 2004
Posted: December 31, 2005 at 2:27 AM / IP Logged  
I searched the forum and I found a lot about running RCAs next to the power wire (which i'm not doing because I have cheap ones ($8 for 17ft haha)). Anyways, can I run my RCAs right next to speaker wire?
audionut405 
Member - Posts: 10
Member spacespace
Joined: December 29, 2005
Location: Canada
Posted: December 31, 2005 at 2:42 AM / IP Logged  
No.The rule of thumb is to always run speaker wire down one side of the car and signal/power wire down the other side.  If you run speaker wire beside RCAs they will interfear with eachother and you will get noises through your speakers.    If, during the install you Must cross them, do so at a 90 degree angle
tym1200 
Member - Posts: 13
Member spacespace
Joined: March 21, 2004
Posted: December 31, 2005 at 2:45 AM / IP Logged  
So running the rca's and power wire wont cause any problems? It is only an 8g power wire since my amp is only 200w rms
audionut405 
Member - Posts: 10
Member spacespace
Joined: December 29, 2005
Location: Canada
Posted: December 31, 2005 at 2:49 AM / IP Logged  

No problem...reguardless of the guage of the wire

dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: December 31, 2005 at 3:33 AM / IP Logged  
audionut405 wrote:

No problem...reguardless of the guage of the wire

How about current draw amount?

And amplified signal will not pick up induced EMI. Low level signal wires (rca's) will pick up EMI from power wires, not speaker wires. 

 

audionut405 
Member - Posts: 10
Member spacespace
Joined: December 29, 2005
Location: Canada
Posted: December 31, 2005 at 4:39 AM / IP Logged  

audionut405 wrote:
No.The rule of thumb is to always run speaker wire down one side of the car and signal/power wire down the other side.  If you run speaker wire beside RCAs they will interfear with eachother and you will get noises through your speakers.    If, during the install you Must cross them, do so at a 90 degree angle

My mistake.  The rule is *power wire down one side and signal wire (which includes speaker wire) down the other side of the car.  Sorry for the confusion

geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: December 31, 2005 at 8:44 AM / IP Logged  
Yeah, you can run speaker wires and RCA's together.
My ex once told me I have a perfect face for radio.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, November 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer