the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

need dome wire conected


Post ReplyPost New Topic
< Prev Topic Next Topic >
exit69 
Copper - Posts: 53
Copper spacespace
Joined: May 06, 2002
Location: Canada
Posted: January 10, 2006 at 6:15 PM / IP Logged  
I want to install a remote starter on a "standard" 95 golf but the dome light only works when you open any door besides the driver's side door. Will this be a problem? Do I really need to hook up the dome wire? I believe that is the wire that tells the unit that no one has entered the car since the "sequence" has been setup and that the car is still in neutral... The remote starter is a (Auto start AS-1260)
Also does anyone have the wiring diagram for my car. I downloaded the one from this site but it doesn't tell which wire or the location of the dome wire and the handbreak wire. Also if they are + or -
Thanks
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: January 10, 2006 at 6:25 PM / IP Logged  
The remote starter must see the door open and close to allow the starter sequence to work. Fix your driver's door pin. It may just need cleaning to make a good ground and connect to the wire. The door pin wire is BROWN / white (-) at the alarm module behind the headlight switch. The parking brake wire should be BROWN / yellow
(-) at the parking brake switch.
sparky
exit69 
Copper - Posts: 53
Copper spacespace
Joined: May 06, 2002
Location: Canada
Posted: January 10, 2006 at 6:44 PM / IP Logged  

thanks Sparkie...

I just noticed on the install guide that there is one wire that I am not sure about.  It says "out when running (-)"

exit69 
Copper - Posts: 53
Copper spacespace
Joined: May 06, 2002
Location: Canada
Posted: January 10, 2006 at 6:56 PM / IP Logged  

Here is the diagram http://engines911.com/asdocs/AS-1260_wd_en_h100s100v101_001115.pdf

The unit was given to me and I think some of the wires have been modified.  Number 8 (orange) is not there...  but then 10 has an orange wire.  11, 12, 13, 15 and 16 are all gone also.  Should I hook up the number 10 wire, which is orange... and if so, to what?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer