the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

keyless entry 1993 toyota surf


Post ReplyPost New Topic
< Prev Topic Next Topic >
keithfree 
Member - Posts: 1
Member spacespace
Joined: April 12, 2006
Location: United Kingdom
Posted: April 12, 2006 at 7:47 AM / IP Logged  
any advice on locating the the door lock wiring for a 1993 toyota surf to fit a keyless entry system
jammac 
Member - Posts: 8
Member spacespace
Joined: April 06, 2006
Location: Australia
Posted: April 13, 2006 at 6:21 PM / IP Logged  
should be  in the kick panel negative triggers, loom coming from the door .also if you have a switch  inside the car  you can get from  that.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer