the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

First enclosure


Post ReplyPost New Topic
< Prev Topic Next Topic >
carb0n03 
Member - Posts: 5
Member spacespace
Joined: April 09, 2006
Location: United States
Posted: April 13, 2006 at 4:18 PM / IP Logged  
THis is for a 2003 Hyundai tiburon. So basicall i taped up my entire trunk. However instead of using the factory panels as a backing i did my own. Now what i'm wondering is if i should have used the stock paneling. This is all for the backing of the enclosure which will be three peices so i can take it out if need be.
This is the first time i've used fiberglass so really if i did it the wrong way its a learning experience. I know how much hardener and proportions and most other things. So if it ends up not working, i guess ill just use the stock paneling right? Any help will be gretly appreciated. Oh and to drscribe what im doing im mounting a 1000/1 on the drivers side, a 300/4 on the passengers side, and a 13w7 in the spare tire well. I'm hoping to have a few pics up whenever my neighbor sends me them. Thanks for all the help
Chris
Project- Fiberglass trunk area to accomadate 13W7, 1000/1, 300/4
sprawl85 
Copper - Posts: 204
Copper spacespace
Joined: March 15, 2006
Location: United States
Posted: April 13, 2006 at 4:54 PM / IP Logged  
Pictures would be nice, really we dont know what the panels you made looks like or what the stocks look like unless we have had experience with that specific car (which i haven't).
fiberglass reminds me of peanut brittle... but fiberglass tastes better!
carb0n03 
Member - Posts: 5
Member spacespace
Joined: April 09, 2006
Location: United States
Posted: April 15, 2006 at 12:25 AM / IP Logged  
heres a few pics of what ive done so far
First enclosure - Last Post -- posted image.
First enclosure - Last Post -- posted image.
First enclosure - Last Post -- posted image.
First enclosure - Last Post -- posted image.
First enclosure - Last Post -- posted image.
First enclosure - Last Post -- posted image.
First enclosure - Last Post -- posted image.
First enclosure - Last Post -- posted image.
Project- Fiberglass trunk area to accomadate 13W7, 1000/1, 300/4
snyderman5 
Member - Posts: 32
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 16, 2004
Location: United States
Posted: April 15, 2006 at 11:24 AM / IP Logged  
I hope you don't live with your mom because she will be wized that you are using her glasses. just kidding have fun
sprawl85 
Copper - Posts: 204
Copper spacespace
Joined: March 15, 2006
Location: United States
Posted: April 15, 2006 at 9:15 PM / IP Logged  
looks like if that is going to be in three seperate pieces (i'm assuming left/middle/right) it should be just fine! Keep the pics coming too
fiberglass reminds me of peanut brittle... but fiberglass tastes better!
carb0n03 
Member - Posts: 5
Member spacespace
Joined: April 09, 2006
Location: United States
Posted: April 15, 2006 at 10:21 PM / IP Logged  
basically heres what happened. i guess i left the sides on for too long and when i was peeling away the tape and foil it started to crack. The middle came out fine so its not a complete loss. So im just going to redo the sides using the stock panels. If anything it was a learning experience.
Project- Fiberglass trunk area to accomadate 13W7, 1000/1, 300/4

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer