the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

amp/sub combo


Post ReplyPost New Topic
< Prev Topic Next Topic >
nothingface9 
Member - Posts: 15
Member spacespace
Joined: July 09, 2006
Posted: September 02, 2006 at 10:01 PM / IP Logged  
Hmm each side is .7 cubic feet.  Will that be a huge problem?
Flakman 
Copper - Posts: 365
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 25, 2005
Location: United States
Posted: September 02, 2006 at 11:37 PM / IP Logged  
You definitely want to match the sub and enclosure. You need to make sure how much airspace your sub needs. The T110s need about .85 cubic feet. You really don't want to skimp on the specs. I know that Alpine Type R subs are good in .65 cubic feet. I don't know if anything else can go that small. You want to make sure these match...otherwise you can have your subs sounding like doodie regardless of what you use.
The Flakman
I feel strange. I have deja vu and amnesia at the same time.
John | Manteca, CA
kfr01 
Gold - Posts: 2,121
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 30, 2003
Posted: September 03, 2006 at 12:06 AM / IP Logged  
Image Dynamics IDQ drivers work in these small box sizes too. That's why I own one. What's more? Good SQ.
I've been very pleased. Highly recommended.
New Project: 2003 Pathfinder
vinspo 
Copper - Posts: 74
Copper spacespace
Joined: October 24, 2004
Location: United States
Posted: September 03, 2006 at 6:21 PM / IP Logged  
Diamond Audio TDX Subwoofers work very well in small sealed enclosures too, a much better value than RF. Their D6 line of amplifiers are of high quality and the monoblocks run pretty cool temps. Just another brand to consider.
nothingface9 
Member - Posts: 15
Member spacespace
Joined: July 09, 2006
Posted: September 03, 2006 at 10:01 PM / IP Logged  

So, i looked around and found a pair of subs that fit my box in air space needed and mountin depth.

http://mobile.jlaudio.com/products_subs.php?series_id=6

Now, i just need help in picking an amp that will drive these things.  Im not sure how to decide how much power i need to supply 2 of these things with at 4 ohms or 1 ohm.

The amp needs to be within 13x18 inches in dimensions to fit its spot.  Any suggestions would be appreciated.

kfr01 
Gold - Posts: 2,121
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 30, 2003
Posted: September 03, 2006 at 10:16 PM / IP Logged  
83.something efficient? Are you sure you want those subs?
New Project: 2003 Pathfinder
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer