the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

speaker problems


Post ReplyPost New Topic
< Prev Topic Next Topic >
scottie18 
Member - Posts: 10
Member spacespace
Joined: October 06, 2006
Posted: November 11, 2006 at 5:25 PM / IP Logged  

hey there people,

i am having a bit of a problem in my 89 jeep yj, with my speakers, sometime when i am going over a bumb, even on pavement, my speakers are cutting out but my subs are still going and playing the beat of the music, now i checked the wiring of the speakers and they appear to be okay.. i was just looking for a little input from member if they have got any ideas of what the problem might be, i do have a panosonic head unit and the speakers are clarion 4x6's..thanks

scott

DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: November 11, 2006 at 6:41 PM / IP Logged  
Yep, sounds like a loose connection or two.  Check them all including at the head unit.
Support the12volt.com
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: November 11, 2006 at 7:03 PM / IP Logged  

Stop going over bumbs in your jeep yj.

Couldn't resist the smart reply....speaker problems - Last Post -- posted image.  Bumbs suck.  Sometimes it amounts to a broken connection on the source unit, a hairline crack that breaks the ground contact with chassis.  It's hard to see a lot of the time, so once you've positively found that all wiring connections are secure with no stray wires, etc., look carefully at the connections to the amp.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: November 11, 2006 at 8:47 PM / IP Logged  

   I would assume that the speakers are connected to the radio.  There is a good chance your problem is a bad connection inside your radio.  Easiest way to find out is to remove your radio, tap on it simulating your vehicle hitting a bump.  If it cuts out chances are it is a bad solder joint inside your radio. 

Let me know what happens


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer