bulldog remote start

Home / the12volt's Install Bay / Car Security and Convenience / bulldog remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jeremy1

Copper - Posts: 52

Joined: January 30, 2003

Location: United States

Posted: January 30, 2003 at 2:47 PM / IP Logged

I recently started installing bulldog security products in my shop and need some help. I've done about a dozen, two different modes RS1200E and RS1300E. The 1200 is just keyless and remote, 1300 keyless, remote and alarm. No problems with the 1200 at all, but every one of the 1300 have come back. Never the same problem, all in different makes and models. I have replaced both bypass modules and brains in these units as per thier tech support but to no avail. I know all connections are good, triple checked. Is this me or is Bulldog famous for these problems?? Confused!!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 30, 2003 at 2:55 PM / IP Logged

Does the units that you install work when it leaves the shop or are there problems right from the start ? I could be a bad lot number that the manufacturer had ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

jeremy1

Copper - Posts: 52

Joined: January 30, 2003

Location: United States

Posted: January 30, 2003 at 3:27 PM / IP Logged

Each one of them works like a champ when it leaves. With in 2 days there is one problem or another. They bring it back I check connections, call tech support, do what they tell me to then test, sure enough works great. Send the customer home, next day, problems again.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 30, 2003 at 3:49 PM / IP Logged

That's wierd !! Depending on the problem.... I would say it would be the system. Other than that each problem is different and most of the time it is installer error and sometimes it's battery/alternator problems.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

jeremy1

Copper - Posts: 52

Joined: January 30, 2003

Location: United States

Posted: January 31, 2003 at 1:53 PM / IP Logged

thanks for your help, we'll keep trying. :)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bulldog remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.