2005 dodge ram diesel remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2005 dodge ram diesel remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

nightowl2

Copper - Posts: 91

Joined: April 26, 2006

Location: Missouri, United States

Posted: January 26, 2007 at 6:10 PM / IP Logged

I have the DEI 528T working great. Now I found the wire on the 60pin plug pin 24. I only get 3.4-4.5 volts. Is that going to be enough? I'm going to try it but I would not think the alarm would sense the truck is running. The alarm has tach learning and finding so I'll try that too.

nightowl2

Copper - Posts: 91

Joined: April 26, 2006

Location: Missouri, United States

Posted: January 26, 2007 at 6:39 PM / IP Logged

It worked. I just had to program it to see it. Everything works great now. I really like that DEI 528T. I times it with a stop watch and got 7 seconds to start with then 22 seconds after a little adjusting. Thanks for all the help.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 dodge ram diesel remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.