dei 1700g wiring 2006 tahoe

Home / the12volt's Install Bay / Car Security and Convenience / dei 1700g wiring 2006 tahoe (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tpickles326

Member - Posts: 1

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 13, 2006

Posted: February 08, 2007 at 8:52 AM / IP Logged

I need some help as to where some of the wires from the dei1700g bypass go to. I have a crimestopper cs2016 alarm that I am trying to integrate. Also could use some help with the positive lock and unlock wires from the cs 2016 unit.

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: February 08, 2007 at 10:12 AM / IP Logged

What kind of help exactly do you need? Most of the wires you are going to connect will run from the remote start to the interface. The 1700G takes the analog outputs from your aftermarket system and converts them into digital information that your vehicle can understand as well as bypassing the passlock system for remote starting.

Installer, IT support, and FFL. I need less hobbies.

Back to Top

stereoh

Member - Posts: 1

Joined: April 03, 2003

Location: United States

Posted: February 08, 2007 at 11:36 AM / IP Logged

What year and make of vehicle are you working on?

As far as help, you can always call crimestopper during their normal hours of operation(8am-4:30pm mon-friday) to get assistance with their products at 1-800-998-6880

Back to Top

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: February 08, 2007 at 11:50 AM / IP Logged

Stereoh....

tpickles326 posted "dei 1700g wiring 2006 tahoe" in the topic line

Installer, IT support, and FFL. I need less hobbies.

Back to Top

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: February 08, 2007 at 12:53 PM / IP Logged

the 1700g uses negative lock/unlock inputs. you asking what each wire on the bypass needs to go to?

Back to Top

rabenoja

Copper - Posts: 61

Joined: April 28, 2004

Location: United States

Posted: February 09, 2007 at 7:26 PM / IP Logged

For what it's worth, I had a problem putting a 1700G in a 06 tahoe last week. I installed everything correctly, as it is wired the same way as a 457G plus a keysense wire. The 1700G just kept sending out all kinds of commands to the car...it was very unpredictable. Anyway, I ended up taking it out and swapping it for a 457Gw. No problems since.

Back to Top

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: February 10, 2007 at 9:37 PM / IP Logged

I have used about 10 of the 1700g and have not had any problems with them. You only need to use the keysense wire on vehicles with the pk3 system. Did you make sure you had it set for the right platform.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei 1700g wiring 2006 tahoe

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.