the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

weird acura rsx system noise


Post ReplyPost New Topic
< Prev Topic Next Topic >
csnut18 
Copper - Posts: 196
Copper spacespace
Joined: January 27, 2007
Location: United States
Posted: March 31, 2007 at 4:19 PM / IP Logged  
Hi I recently installed a jvc kd-hdr1 to replace the factory bose headunit on my 06 acura rsx type s. I chose this headunit cause it has a built in hd radio tuner and it lets me hear my ipod and sirius satellite without fm modulator garbage. I installed it using the metra 70-1725 harness which allows you to use the headunit with your factory bose amp and sub. The harness connects to the aftermarket headunits rca outputs with 4 rca plugs put on by metra. This headunit has 2.5v preouts. My problem is I am having a annoying alternator whine that goes up slightly with the engine revs. I did not find a satisfactory bolt in the vicinity of the headunit so I grounded it in the drivers side kickpanel by unscrewing a bolt connected to the chassis. I did not use the factory for any power connections except for the accesory wire. I ran a 14gauge wire from the battery for power. And I used the rca's on the metra harness and plugged them into the corresponding rca preouts on the back of the jvc. I dont know how to get rid of this noise. It is bothering me a lot because I had such high expectations for this project and now every time I hear the alternator whine I feel like ripping this thing out of my dash. Please help!
csnut18 
Copper - Posts: 196
Copper spacespace
Joined: January 27, 2007
Location: United States
Posted: March 31, 2007 at 8:05 PM / IP Logged  
please help someone
dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: March 31, 2007 at 9:12 PM / IP Logged  
In recent experiences with the amplified system in the Lexus RX SUV it simply boiled down to an amp bypass. The level matching and mismatched impedance between h/u and amp simply would not work. I realize Bose has separate amps per speaker, so in order to do this you must bypass each speaker in the car.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer