interfacing remote

Home / the12volt's Install Bay / Car Security and Convenience / interfacing remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

4wslude

Member - Posts: 9

Joined: April 09, 2007

Location: Canada

Posted: April 09, 2007 at 8:30 PM / IP Logged

I have recently got a compustar 1 way alarm install and my car comes with factory keyless entry originally. How do I interface it so I don't have to carry 2 remotes all the time

noob

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 09, 2007 at 8:42 PM / IP Logged

when your done you will NOT carry the O.E. remote!

4wslude

Member - Posts: 9

Joined: April 09, 2007

Location: Canada

Posted: April 09, 2007 at 9:13 PM / IP Logged

Yo this doesn't help much

noob

mikvot

Gold - Posts: 1,043

Joined: December 19, 2006

Location: Missouri, United States

Posted: April 09, 2007 at 9:19 PM / IP Logged

Your original post is weak, you need to list the year, make ,and model of the vehicle, and the exact model of the system going into the car...and exactly what you mean by "interface".....then we can help.

4wslude

Member - Posts: 9

Joined: April 09, 2007

Location: Canada

Posted: April 09, 2007 at 11:03 PM / IP Logged

It's a 98 civic sedan and the model of the alarm system is cm3300 compustar 1way

noob

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: April 10, 2007 at 12:05 PM / IP Logged

When I checked on Directechs it did mention that the factory alarm can only be disabled via remote. That may be the reason why they told you to keep both remotes together.

peterubers

Silver - Posts: 706

Joined: December 29, 2006

Location: United States

Posted: April 10, 2007 at 12:59 PM / IP Logged

hmm... the info i have doesn't mention anything -

12 VOLT CONSTANT	WHITE (+)	IGNITION SWITCH HARNESS
STARTER	BLACK/ WHITE (+)	IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	BLACK / YELLOW (+)	IGNITION SWITCH HARNESS
IGNITION 2	N/A
IGNITION 3	N/A
ACCESSORY /HEATER BLOWER 1	YELLOW (+)	IGNITION SWITCH HARNESS
ACCESSORY /HEATER BLOWER 2	WHITE/ BLACK (+)	IGNITION SWITCH HARNESS
KEYSENSE	N/A
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	RED / BLACK (+)	IN DRIVERS KICK PANEL
POWER LOCK	GREEN / WHITE (TYPE B)	@ BLUE PLUG IN DRIVERS KICK PANEL
POWER UNLOCK	GREEN/ ORANGE (TYPE B)	@ BLUE PLUG IN DRIVERS KICK PANEL
LOCK MOTOR WIRE	WHITE/ RED (+)	IN DRIVERS KICK PANEL, at DOOR HARNESS
DOOR TRIGGER	LIGHT GREEN/ RED (-)	LOW IN DRIVERS KICK PANEL
DOMELIGHT SUPERVISION	LIGHT GREEN/ BLACK (-), Requires Part #775 Relay	IN DRIVERS A PILLAR
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	BLUE to GRAY	@ STEERING COLUMN HARNESS
TACH	BLUE, See NOTE *1	@ TACH TEST CONNECTOR
WAIT TO START LIGHT	N/A
BRAKE	GREEN / WHITE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	N/A
ANTI-THEFT	N/A

The search function is your friend.

4wslude

Member - Posts: 9

Joined: April 09, 2007

Location: Canada

Posted: April 10, 2007 at 4:49 PM / IP Logged

Thanks peterubers. I guess I needed to tap into POWiER LOCK AND UNLOCK When Armed and Disarmed the alarm system with my compustar remote

noob

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

interfacing remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.