cooling fans

Home / the12volt's Install Bay / Car Audio / cooling fans (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tdsteele

Silver - Posts: 393

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 22, 2003

Location: United States

Posted: July 01, 2007 at 7:15 PM / IP Logged

Is it ok to hook these two cooling fans up to the amp remote turn on wire to power them?

http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=259-125

Installer_mss

Copper - Posts: 221

Joined: February 14, 2005

Location: United States

Posted: July 01, 2007 at 9:57 PM / IP Logged

use a relay to power the fans and the amps and any other accessory needed to be turned on by the head unit.

the turn on lead is only at most 1 amp (.5 in most cases) and can only power 2 pieces of equipment max, beyond that you need a relay.

85 - ground

86 - remote turn on lead from headunit

30 - out to everything to be powered up by turn-in lead (amps, crossovers, fans, etc.)

87 - constant power

87a - not used

"If a man made it, another can modify it...it just takes some thinking."

"If you ask questions, you're a fool for 5 minutes; if you don't, you're a fool for a lifetime."

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cooling fans

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.