setting 2 500/1 amps for 2 12 w6's

Home / the12volt's Install Bay / Car Audio / setting 2 500/1 amps for 2 12 w6's (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pman187

Member - Posts: 12

Joined: August 06, 2005

Location: United States

Posted: July 24, 2007 at 5:29 PM / IP Logged

I have a 500/1 amp running 2 12w6's right now, and i recently purchased another 500/1 amp from one of my buddies so that i will have 1 amp for each sub. I was wondering if someone could help me out with the wiring for the amp and I also need help with setting the amp for each sub. Thank you very much.

derder1984

Member - Posts: 9

Joined: August 04, 2007

Location: United States

Posted: August 05, 2007 at 6:31 PM / IP Logged

How are you running it now the subs now? Is it 2 dual 4 ohm 12w6 subs wired in parellel to one termminal dropping it to 1 ohm to the amp? I would say the best way, if it isnt too hard for you is to have the a single box with dual ports and each sub is in its own seperate compartment. Then running each to its own amp.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

setting 2 500/1 amps for 2 12 w6's

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.