ultra 2250 rs and alarm start kill

Home / the12volt's Install Bay / Car Security and Convenience / ultra 2250 rs and alarm start kill (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

window

Copper - Posts: 56

Joined: September 26, 2005

Location: United States

Posted: December 28, 2007 at 5:49 PM / IP Logged

i'm using this ultra 2250 on a 2000 nissan maxima my issue is the groud while running output it only has one that is programable for start kill but i need it to run the transponder box is there any other wire i can use for start kill relay

Back to Top

519civiconair

Copper - Posts: 50

Joined: October 30, 2007

Location: Ontario, Canada

Posted: December 28, 2007 at 6:03 PM / IP Logged

if the GWR is 500ma diode to each starter kill and transpoder box if its only 200-250ma relay as follows pin 86 gwr 85 fused +12v pin 87 Ground and pin30 diode to each only need 1 GWR to run both its just how strong the output is........ a relay only needs about 150ma to activate hope this helps

F.B.S.S air ride is the only way to roll

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ultra 2250 rs and alarm start kill

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.