97 mercedes benz e420 remote start

Home / the12volt's Install Bay / Car Security and Convenience / 97 mercedes benz e420 remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

qdaddy

Copper - Posts: 133

Joined: March 06, 2006

Posted: December 29, 2007 at 2:21 PM / IP Logged

wire info 97 e420 benz help please

qdaddy

Copper - Posts: 133

Joined: March 06, 2006

Posted: December 29, 2007 at 5:17 PM / IP Logged

doorlock wires anyone

qdaddy

Copper - Posts: 133

Joined: March 06, 2006

Posted: December 30, 2007 at 2:48 AM / IP Logged

got the doorlock wires but is there an available bypass mod

qdaddy

Copper - Posts: 133

Joined: March 06, 2006

Posted: December 30, 2007 at 2:49 AM / IP Logged

trunk release wire?

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 30, 2007 at 8:47 AM / IP Logged

12 VOLTS

Red

Ignition switch harness

IGNITION

Pink/red

Ignition switch harness

IGNITION 2

Pink / YELLOW

Ignition switch harness

ACCESSORY

Pink/green

Ignition switch harness

STARTER

Purple

Ignition switch harness

TACH SIGNAL

Use fuel injector

LOCK

Black

In passenger side kickpanel

UNLOCK

Blue

In passenger side kickpanel

DOORPIN

SEE NOTES

All 4 doors are separate circuits. BROWN / GRAY is left front, BROWN / RED is right front, BROWN / GREEN is left rear and BROWN / BLACK is right rear. All 4 wires are located at the PSE module under the rear seat on the passenger side.

HOODPIN

BROWN / red

At pinswitch behind left headlight

TRUNK PIN

BROWN / yellow

AT PSE module under rear seat

TRUNK RELEASE

Violet

At release switch in dash

FACTORY ARM

Arms with lock wire

FACTORY DISARM

Disarms with unlock wire

BRAKESWITCH

BLACK/ red

At switch above brake pedal

PARKLIGHTS

Gray/red & Gray/black

At light switch harness

Both wire must be used and isolated with relays.

HEADLIGHTS

REVERSE LIGHTS

Gray / YELLOW

DKP in harness to rear of vehicle

DIMMER

Gray/blue

At any illuminated dash switch

VSS WIRE

GREEN/ black

Radio harness

qdaddy

Copper - Posts: 133

Joined: March 06, 2006

Posted: January 03, 2008 at 11:13 PM / IP Logged

thanx 4 tha reply found trunk release but locks could only find at switch one wire neg resistance but can tell me about the bypass mod needed it has a swicthblade key and dont know of a company that has bypass 4 that thanx

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 04, 2008 at 1:47 AM / IP Logged

Forget the 1 wire, the blue and black join the floor loom just in front of driver's* seat and extending lock (Black) will close windows etc.

* Drivers seat in UK, you might have to go to passenger side. I can't think how to go-around transponder. Since you have a blade key it shouldn't be that difficult if you can find 2 transponder wires coming from ign switch you can use a 556 UW to by-pass it set for European cars.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 mercedes benz e420 remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.