pics of my keyless and window modules

A few months ago, I installed a Valet 712T keyless entry system and two Directed 530T window modules in my car. Somewhere on this forum I posted a few photos of the install. However, I recently came to the conclusion that I'd like to have all my modules installed in one central location - the keyless system was installed in my passenger footwell area and each window module below each front seat, which looked rather sloppy. The sound of the modules clicking was also a bit irritating.So, I decided to re-route all the wiring. I retro-fitted OEM power windows, so I could route the wires as I wished to. I mounted all the modules below the rear seat, so with the sound-deadening carpet and seat over them, the sound is much more muted. I also placed all my relays (trunk, doors, horn, parking lights and radio-off-when-door-open) in the passenger footwell area. The valet button is mounted inside the glove-compartment, the LED next to the driver's side door pin.F R A N S

1985 Mercedes-Benz 230E

320 000 km / 199 000 miles

Full MB Service History

very clean, professional work, congrats...The search function is your friend.

Looks good!Kevin Pierson

that must have taken enough rolls of wires. nice install, very sneaky on the valet pin ! if only i had the time to do that to my car and wire up 20 relays ahah.