foglight fading how

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / foglight fading how (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

zeecue

Member - Posts: 6

Joined: January 11, 2008

Location: Denmark

Posted: January 12, 2008 at 12:35 PM / IP Logged

I have asked a question about how i turn my foglights on, by using the negative triggering trunk release funktion on my alarm.

Then i thought i wantet to add a fading effect, to fade the foglights on and off, after like 30 seconds.

What parts are needed to do this, is PWM the best idea? the bulbs are 55watt each.

The alarm, gives a negative signal, for about 1 second, and the bulbs need 12v.

Best regards

Morten

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: January 14, 2008 at 7:43 AM / IP Logged

PWM would be a safe bet, especially with a 55w bulb.

Kevin Pierson

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

foglight fading how

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.