viper 1002 in 05 f150/dome light issue?

Home / the12volt's Install Bay / Car Security and Convenience / viper 1002 in 05 f150/dome light issue? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

barkster

Member - Posts: 20

Joined: November 04, 2007

Posted: January 13, 2008 at 4:02 PM / IP Logged

I had a Viper 1002 Alarm put in my truck by some "kids" at mobile one. After they installed it, when you closed the door and armed it, after the dome light went off the alarm would go off. Their solution to it was just to cut the dome wire. That's not a solution. I didn't realize it till I was home. I need to fix it myself since these kids have no clue what they are doing. How can I get this to work properly with this alarm and also make it turn off the dome light immediately after arming the alarm/locking doors like it did before? Any help would be appreciated.

Back to Top

barkster

Member - Posts: 20

Joined: November 04, 2007

Posted: January 13, 2008 at 4:11 PM / IP Logged

Here is a link to the installation manual for the alarm http://www.directeddealers.com/manuals/ig/viper/N3102V_11-06post.pdf

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 13, 2008 at 9:19 PM / IP Logged

the unit should have a programming option to allow dome light delay. If you double pulse the LOCK, it will turn off domelight.

Back to Top

barkster

Member - Posts: 20

Joined: November 04, 2007

Posted: January 13, 2008 at 9:26 PM / IP Logged

Looks like they didn't know how to program it. I'll research a bit more or bring to someone else Thanks

Back to Top

speed of sound

Member - Posts: 19

Joined: February 18, 2007

Location: Connecticut, United States

Posted: January 13, 2008 at 9:46 PM / IP Logged

The wiring above is for vehicles without keyless entry. Vehicles with keyless entry, the door trigger wires are found at the BCM, green plug. The LF door trigger is BLACK / YELLOW in pin 4. The RF door trigger is BLACK/ pink in pin 5. The LR door trigger is BLACK/ lt. blue in pin 12. The RR door trigger is BLACK/ white in pin 13. Use all wires and diode isolate each. The BCM (BThe wiring above is for vehicles without keyless entry. Vehicles with keyless entry, the door trigger wires are found at the BCM, green plug. The LF door trigger is BLACK / YELLOW in pin 4. The RF door trigger is BLACK/ pink in pin 5. The LR door trigger is BLACK/ lt. blue in pin 12. The RR door trigger is BLACK/ white in pin 13. Use all wires and diode isolate each. The BCM (Body Control Module) is on the driver side rear cabin wall.ody Control Module) is on the driver side rear cabin wall.

Speed of Sound Technologies

230 pershing Dr

Ansonia, CT 06401

203-954-0066

Back to Top

Search for other posts by speed of sound

barkster

Member - Posts: 20

Joined: November 04, 2007

Posted: January 14, 2008 at 7:46 AM / IP Logged

Hey I found that wordage on a piece of paper they gave me when I was thinking of installing myself. Obviously they didn't read that. So they should have hooked up the door triggers instead of the dome or both?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 1002 in 05 f150/dome light issue?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.