1996 fiat punto 60, alarm wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 1996 fiat punto 60, alarm wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

carlospicas

Member - Posts: 1

Joined: April 04, 2008

Location: Portugal

Posted: April 04, 2008 at 7:16 AM / IP Logged

Can any one tell me where do I find Wire diagram!

I really need to install an alarm on it...

Thanks in advance...

kola7126

Copper - Posts: 93

Joined: September 13, 2007

Location: Russian Federation

Posted: April 08, 2008 at 3:03 PM / IP Logged

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fipun99gbb.doc

MAKE FIAT MOD. PUNTO YEAR 99 ® PETROL

DIESEL

ALARM/SIREN
POSITION

Position the compact alarms and the sirens in the engine compartment near the

support of the battery. Pass the cables through the original rubber sleeve near the

brake fluid reservoir.

CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard, driver’s side.

POWER SUPPLY + 30: connect to the 6 mm2 WHITE/ RED wire located in the multiway connector in

the fuse box.

- 31: connect with a ring terminal to the car body.

IGNITION WIRE + 15/54: connect to the 2 mm2 ORANGE wire located in the connector coming out

of the ignition key.

DIRECTION INDICATORS Connect to the 1 mm2 PINK and PINK/WHITE wires in the 40 way black connector

located in the front part of the fuse box.

ELECTRIC WINDOWS Controls with mixed polarity
Front window, driver’s side:

cut the 2,5 mm2 WHITE/ RED and VIOLET / YELLOW wire.

Front window, passenger’s side:

These connections should be effected in the wiring harnesses coming out of the

original switches of the windows closing.

CENTRAL DOORS LOCKING Negative control signal

Connect to the WHITE/ GREEN wire nr. 34 (lock) and light BLUE/VIOLET wire nr.

24 (unlock) in the 40 way black connector located in the front part of the fuse box.

IMMOBILISATION POINT Fuel pump

Cut the 2,5 mm2 VIOLET / YELLOW wire located in the wiring harness coming out

of the 30 way black connector in the front part of the fuse box.

STARTER +50: Cut the wire located at the position marked “+50” directly in the wiring harness

coming out of the ignition key.

BONNET SWITCH Install an additional switch on the headlamp support plate.

DOORS SWITCH For the vehicles with 2 doors: connect to the 1 mm2 light BLUE wire

(BLUE / YELLOW wire in the version with 4 doors) in the 40 way black connector

located in the front part of the fuse box.

BOOT SWITCH Connect to the wire located in the wiring harness coming out of the connector of

the boot lamp.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1996 fiat punto 60, alarm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.